Home / Analyzers / miniTOC² Analyzer
TOC Analyzer · Online & Offline

miniTOC² Analyzer

The next-generation TOC analyzer. Improved UV oxidation and optimized fluidics deliver reliable conversion of organic content with significantly reduced water consumption.

  • ✓ Optimized sample volume to approx. 7 mL/min
  • ✓ Improved UV oxidation — reliable conversion of organic content
  • ✓ Long-life UV lamp — up to 12 months
  • ✓ Continuous measurement every 2 seconds
  • ✓ Up to 3 sample inlets
  • ✓ Remote service — online service diagnosis
Overview

Designed for TOC in online monitoring mode

Like its predecessor, the miniTOC² facilitates online/offline monitoring of total organic carbon. Fast, accurate readings via conductivity detection are further enhanced by the adapted direct-surface UV oxidation geometry and optimized fluidics and sensor coordination. Improved measurement accuracy increases precision and reduces costs and environmental impact by minimizing water consumption to 7 mL/min — an approx. 50% saving vs. previous models, equating to 3,600 L/year less. The long-life UV lamp (12 months) reduces maintenance and waste, with a low detection limit of 0.5 ppb and an extended range up to 1500 ppb.

~7 mL/min
Sample volume flow (≈50% saving)
12 months
Long-life UV lamp
0.5–1500 ppb
TOC measuring range
Features & Options

Advanced technology, user-friendly maintenance

UV reactor

Enhanced UV oxidation via the adapted direct-surface geometry of the UV lamp and the fluid pathway.

Conductivity sensor

Shielded sensors reduce external influences like temperature fluctuations, enhancing measurement stability.

System status

A complete software overhaul gives a clear status overview, including operating hours for sensors, pumps, and the UV lamp.

Sample mode

A sample-mode configuration measures separate samples offline; the sequence is user-customizable.

Multiline mode

Order the 4-input configuration (miniTOC pro); a software upgrade allows measuring up to 3 loops sequentially.

Additional pump

An optional second pump head alternates sample transport, extending runtime and halving pump-tube replacement.

Data export

Export to external storage in various formats, or store in the cloud and share with customer service for diagnosis.

21 CFR Part 11 software

Software with 21 CFR Part 11 conformity for pharma applications.

Autosampler

In sample mode, upgradable with an autosampler — two trays, each rack holding 40 positions for 40 mL vials.

Heat exchanger

Required if the medium temperature is higher than 50 °C.

Pressure regulator

Required if the medium pressure is higher than 1 bar.

Check of sample flow

Initiates an alarm in case of inlet flow is zero.

Technical Data

Main technical specifications

Technical Specifications
Method & detection UV oxidation (partial) & conductivity
Sample volume flow approx. 7 mL/min
Time of measurement 2 sec (online mode) | 1 min (sample mode)
Measurement range 0.5 to 1500 ppb
Accuracy / precision < 0.200 µS/cm ± 0.001 µS/cm
> 0.200 µS/cm ± 0.5 %
Ports 1 for sample, 1 for SST (basic) | 1 for sample, 3 for SST (pro)
Related norms USP <643>, EP 2.2.44, DIN EN 1484
Ambient parameters relative humidity: 10 to 95 %, temperature: 10 to 45 °C
Analogue outputs Basic system: 2 x 0–20 mA Output according to Namur NE43 (TOC & Cond.)
Pro system: up to 4 x 0–20 mA Output according to Namur NE43 (3 TOC & Cond.)
Digital outputs 1 x Relay Signal (Alarms & TOC Limit)
Dimensions, weight, power 300 x 200 x 500 mm, 14 kg, 110 – 230 V, 50 Hz, 60 Watt
Medium Requirements
Type of sample medium pure or ultra pure water
Medium conductivity < 2 µS/cm (upgradable to < 10 µS/cm)
Inlet pressure < 1 bar
Sample temperature < 50 °C

Get a quote now

We'll help you choose the right TOC analyzer and answer any questions about your required configuration.

Contact Us